Publications

  1. Olapojoye, Abdullahi, Abhishek Singh, Eri Nishi, Baowei Fei, Aria Nostratinia, and Fatemeh Hassanipour. “Infants Sucking Pattern Identification Using Machine-Learned Computational Modeling.” Journal of Engineering and Science in Medical Diagnostics and Therapy 8, no. 3 (2025).
  2. Nishi, Eri, Takumi Makado, Abhishek Pratap Singh, and Fatemeh Hassanipour, ”Investigation of Forces Applied to an Artificial Nipple Using a Four Node Model Simulating Infant Tongue Movement.” IEEJ Transactions on Electrical and Electronic Engineering (2024).
  3. Charles, Daniel, Lucas Harrison, Fatemeh Hassanipour, and Rami R. Hallac. ”Nasal Airflow Dynamics following LeFort I Advancement in Cleft Nasal Deformities: A Retrospective Preliminary Study.” Diagnostics 14, no. 12 (2024): 1294.
  4. Yousefi, Bardia, Xavier PV Maldague, and Fatemeh Hassanipour, “Diagnostic Biomarker for Breast Cancer Applying Rayleigh Low-Rank Embedding Thermography.” Engineering Proceedings 51, no. 1 (2023): 38.
  5. Li, Yi, Shadi Zaheri, Khai Nguyen, Li Liu, Fatemeh Hassanipour, and Leonidas Bleris. “Machine learning-based approaches for identifying human blood cells harboring CRISPR-mediated fetal chromatin domain ablations.” Scientific Reports 12, no. 1 (2022): 1-10.
  6. Lin Jiang, and Fatemeh Hassanipour, “ In Vitro Flow Visualization in a Lactating Human Breast Model,” Annals of biomedical engineering, 49(12), 2021, pp.3563-3573.
  7. Lin Jiang, Navid Sadeghi Varnousfaderani, Rammy Hallac, Alex Kane, Yonas Tadesse, and Fatemeh Hassanipour, “Bio-Inspired Breastfeeding Simulator Integrated With Software Interface and Feedback Controls,” IEEE Robotics and Automation Letters 7, no. 2 (2021): 1118-1125.
  8. Adolfo Lozano, Jody Hayes, Lindsay Compton, Fatemeh Hassanipour, “Pilot Clinical Study Investigating the Thermal Physiology of Breast Cancer via High-resolution Infrared Imaging,” Bioengineering 8, no. 7 (2021): 86.
  9. Shadi Zaheri, and Fatemeh Hassanipour, “A Mathematical Modeling Toolbox for Ion Channels and Transporters Across Cell Membranes,” International Journal of Heat and Mass Transfer, International Journal of Heat and Mass Transfer 177 (2021): 121423.
  10. Jamasp Azarnoosh, and Fatemeh Hassanipour, “Fluid-Structure Interaction Modeling of Lactating Breast, Newtonian vs. non-Newtonian Milk,” Journal of Biomechanics 124 (2021): 110500.
  11. Xudong An, Lin Jiang, and Fatemeh Hassanipour. “Numerical Analysis of Air Vortex Interaction with Porous Screen,” Fluids 6, no. 2 (2021): 70.
  12. Lin Jiang, Diana Alatalo, Fatemeh Hassanipour,“A Human Milk Mimicking Fluid for PIV Experiments,” Experiments in Fluids 61, no. 10 (2020): 1-7.
  13. Mohammadreza Mahmoudi, Chao Wang, Salvador Moreno, Scott R. Burlison, Diana Alatalo, Fatemeh Hassanipour, Samantha E. Smith, Mohammad Naraghi, and Majid Minary-Jolandan, “Correction to Three-Dimensional Printing of Ceramics through Carving a Gel and Filling in the Precursor Polymer,” ACS Applied Materials & Interfaces 12, no. 38 (2020): 43339-43339.
  14. Adolfo Lozano, Jody Hayes, Lindsay Compton, Jamasp Azarnoosh, Fatemeh Hassanipour, “Determining the thermal characteristics of breast cancer based on high-resolution infrared imaging, 3D breast scans, and magnetic resonance imaging,” Scientific reports 10, no. 1 (2020): 1-14.
  15. Shadi Zaheri, and Fatemeh Hassanipour, “A Comprehensive Approach to the Mathematical Modeling of Mass Transport in Biological Systems: Fundamental Concepts and Models,” International Journal of Heat and Mass Transfer 158 (2020): 119777.
  16. Diana Alatalo, and Fatemeh Hassanipour, “An Experimental Study on Human Milk Rheology: Behavior Changes from External Factors,” Journal of Fluids,5(2), 2020, p.42.
  17. Jamasp Azarnoosh, and Fatemeh Hassanipour, “Fluid-Structure Interaction Modeling of Lactating Breast,” Journal of biomechanics 103 (2020): 109640.
  18. Lin Jiang, and Fatemeh Hassanipour, “Bio-inspired Breastfeeding Simulator (BIBS): A Tool for Studying the Infant Feeding Mechanism,” IEEE Transactions on Biomedical Engineering 67, no. 11 (2020): 3242-3252, Featured Article.
  19. Diana Alatalo, Lin Jiang, Donna Geddes, Fatemeh Hassanipour, “Capturing Nipple Deformation and Peripheral Pressure on the Areola During Breastfeeding,” Journal of biomechanical engineering 142, no. 1 (2020), Recepient of Editors’ Choice Award.
  20. Adolfo Lozano, Fatemeh Hassanipour, “Infrared Imaging for Breast Cancer Detection: An Objective Review of Foundational Studies and its Proper Role in Breast Cancer Screening,” Infrared Physics & Technology 97 (2019): 244-257.
  21. Sarvenaz Sobhansarbandi, Lizon Maharjan, Babak Fahimi, and Fatemeh Hassanipour, “Thermal Fluid Analysis of Cold Plasma Methane Reformer,” Fluids 3, no. 2 (2018): 31.
  22. Negin Mortazavi, Donna Geddes, Fatemeh Hassanipour, “Lactation in the Human Breast from a Fluid Dynamics Point of View,” Journal of biomechanical engineering 139, no. 1 (2017): 011009.
  23. Navid Omidvar and Fatemeh Hassanipour, “Convective Heat Transfer of Al2O3 Nanofluids in Porous Media,” Journal of Heat Transfer 139, no. 3 (2017).
  24. Patricia M. Martinez, Vladimir A. Pozdin, Alexios Papadimitratos, William Holmes, Fatemeh Hassanipour, and Anvar A. Zakhidov. “Dual Use of Carbon Nanotube Selective Coatings in Evacuated Tube Solar Collectors,” Carbon 119 (2017): 133-141.
  25. Sarvenaz Sobhansarbandi, Patricia M. Martinez, A. Papadimitratos, A. Zakhidov, Fatemeh Hassanipour, “”Evacuated Tube Solar Sollector with Multifunctional Absorber Layers,” Solar Energy 146 (2017): 342-350.
  26. Patricia M. Martinez, Vladimir A. Pozdin, Alexios Papadimitratos, William Holmes, Fatemeh Hassanipour, George Dover, and Anvar A. Zakhidov. “Carbon nanotube dry spinnable sheets for solar selective coatings by lamination,” Eurasian Chemico-Technological Journal 18, no. 4 (2016): 241-249.
  27. Alexios Papadimitratos, Sarvenaz Sobhansarbandi, V. Pozdin, A. Zakhidov, Fatemeh Hassanipour, “Evacuated Tube Solar Collectors Integrated with Phase Change Materials,” Solar Energy 129 (2016): 10-19.
  28. Arun Karunanithi, Fatemeh Hassanipour, “Heat Sink with Multi-Layer of Porous Media,” Journal of Porous Media 19, no. 8 (2016).
  29. Negin Mortazavi, Fotteini Hassiotou, Donna Geddes, Fatemeh Hassanipour, “Mathematical Modeling of Mammary Ducts in Lactating Human Females,” Journal of biomechanical engineering 137, no. 7 (2015).
  30. Negin Mortazavi and Fatemeh Hassanipour, “Effect of Apex Angle, Porosity, and Permeability on Flow and Heat Transfer in Triangular Porous Ducts,” Journal of Heat Transfer 136, no. 11 (2014).
  31. Xudong An, Howard Fultz, Fatemeh Hassanipour, “Experimental Study of Air Vortex Interaction with Porous Screens,” Special Topics & Reviews in Porous Media: An International Journal 5, no. 4 (2014).
  32. Fatemeh Hassanipour, Isaac Perez-Raya, Negin Mortazavi, “Simulation of Vortex Ring Permeation in Porous Media,” Journal of Porous Media, vol. 16 , no. 7 , 2013.
  33. Laura Small and Fatemeh Hassanipour, “Bio-Inspired Segmented Flow: Effect of Particle Elongation on the Heat Transfer,” Journal of heat transfer 135, no. 7 (2013).
  34. Manali Shukla and Fatemeh Hassanipour, “Heat Transfer in Porous Media with Slurry of Phase Change Materials,” International Journal of Engineering 6, no. 1 (2012): 510-520.
  35. Fatemeh Hassanipour and Jose Lage, “Preliminary Experimental Study of a Bio-Inspired Phase Change Particle Capillary Heat Exchanger,” International Journal of Heat and Mass Transfer 53, no. 15-16 (2010): 3300-3307.
  36. Fatemeh Hassanipour and Jose Lage, “New Bio-Inspired, Multiphase Forced Convection Cooling by ABS Plastic or Encapsulated Paraffin Beads,” Journal of heat transfer 132, no. 7 (2010).
  37. Fatemeh Hassanipour and Jose Lage, “Effect of a Porous Medium on the Flow of a Liquid Vortex,” International Journal of Engineering (IJE) 3, no. 6 (2010): 587.
  38. Fatemeh Hassanipour and Jose Lage, “Numerical Simulation of Capillary Convection with Encapsulated Phase-Change Particles,” Numerical Heat Transfer, Part A: Applications 55, no. 10 (2009): 893-905.

Other conferences

  1. Abdullahi Olapojoye, Aria Nosratinia, and Fatemeh Hassanipour, ”Geometry and physics-informed neural network modeling of flows inside y-shaped bifurcated ducts,” in Proceedings of the SB3C2024 Summer Biome- chanics, Bioengineering and Biotransport Conference, Lake Geneva, WI, USA, June 11-14 2024, poster Presentation.
  2. Olapojoye, Abdullahi, Abhishek Singh, Eri Nishi, Baowei Fei, Aria Nostratinia, and Fatemeh Hassanipour, ”Infants sucking patterns identification using machine learning,” in Proceedings of the SB3C2024 Summer Biomechanics, Bioengineering and Biotransport Conference, Lake Geneva, WI, USA, June 11-14 2024, podium Presentation.
  3. Abdullahi Olapojoye, Abhishek Singh, Eri Nishi, Baowei Fei, Aria Nosratinia, and Fatemeh Hassa nipour, ”Machine learning-driven classification system for infant sucking patterns,” in Proceedings of the ASME 2024 International Mechanical Engineering Congress and Exposition (IMECE2024), Portland, OR, USA, November 17-21 2024.
  4. Abdullahi Olapojoye, Aria Nosratinia and Fatemeh Hassanipour, ”Prediction of flows through y-shaped biological structures using physics-informed and geometry-informed neural networks,” in Proceedings of the SB3C2023 Summer Biomechanics, Bioengineering and Biotransport Conference, Vail, Colorado, USA, June 4-8 2023, poster Presentation.
  5. Daniel Charles, Lucas Harrison, Rami Hallac, and Fatemeh Hassanipour, ”Nasal Airflow Dynamics in Cleft Nasal Deformities,” in Proceedings of the ASME 2024 International Mechanical Engineering Congress and Exposition (IMECE2024), Portland, OR, USA, November 17-21 2024.
  6. Jamasp Azarnoosh, and Fatemeh Hassanipour, “Fluid-structure Interaction Simulation of Lactating Human Breast,” Proceedings of AJKFluids Engineering Conference, San Francisco, CA., 2019, winner of the Flow Visualization Competition.
  7. Lin Jiang, Diana Alatalo, and Fatemeh Hassanipour, “Effects of Nutritive and Non-nutritive Suckling on Human Nipple Deformation during Breastfeeding,” Biomedical Engineering Society Annual Meeting, Philadelphia, PA, October, 2019.
  8. Lin Jiang, Diana Alatalo, Donna Geddes, and Fatemeh Hassanipour, “Lactating Human Breast Response To Infant Oral Movements,” Summer Biomechanics, Bioengineering and Bio-transportation Conference, Seven Springs, PA, June, 2019.
  9. Jamasp Azarnoosh, Fatemeh Hassanipour, “Effect of the Non-Newtonian Viscosity of Milk Flow in the Breast Ductal System,” Proceedings of ASME International Mechanical Engineering Congress & Exposition IMECE, Salt Lake City, Utah, November 11-14, 2019.
  10. Jamasp Azarnoosh, Fatemeh Hassanipour, “Fluid-Structure Interaction Simulation of Lactating Human Breast,” Proceedings of ASME-JSME-KSME Joint Fluids Engineering Conference FEDSM2019 July 28-August 1, 2019,San Francisco, CA, USA.
  11. Lin Jiang, Diana Alatalo, Donna Geddes, Fatemeh Hassanipour, “A Clinical Experiment on Infant Applied Pressures During Breastfeeding,” Proceedings of the 2018 International Mechanical Engineering Congress & Exposition IMECE2018, November 9-15, 2018, Pittsburgh, PA, USA. Nominated for the Best Paper Award.
  12. Diana Alatalo, Lin Jiang, Fatemeh Hassanipour, “Preliminary study on infant applied pressures during breastfeeding and Poisson’s ratio in lactating human nipple,” The World Congress of Biomechanics, 2018, Dublin, Ireland.
  13. Sarvenaz Sobhansarbandi , Fatemeh Hassanipour, “Melting Process Expedition of Phase Change Materials via Silicone Oil,” ASME Power & Energy Conference, 2018, Lake Buena Vista, FL. 2018.
  14. Jamasp Azarnoosh, Fatemeh Hassanipour, “CFD Simulation of Lactating Breast,” Bluebonnet Symposium on Thermal-Fluid Sciences, April 2018, at Southern Methodist University in Dallas, TX.
  15. Moahammad Aliakbari, Fatemeh Hassanipour,“Bio-heat Transfer in Lactating Human Breast,” Bluebonnet Symposium on Thermal-Fluid Sciences, April 2018, at Southern Methodist University in Dallas, TX.
  16. Fatemeh Hassanipour, “Biomechanics of the Lactating Breast,” 9th International Symposium on the Breast, February 2017, Santa Monica CA, USA, Invited Speaker.
  17. Xudong An, Manish Arora, Wei Huang, Indrani Paul, William C. Brantley, and Fatemeh Hassanipour, “Numerical analysis of rectangular channel heat sink performance for super computing applications,” In ASTFE Digital Library. Begel House Inc., 2017.
  18. Sarvenaz Sobhansarbandi, Papadimitratos A, Pozdin V, Zakhidov A, Hassanipour F. “Solar Thermal Collector With Multifunctional Absorber Layers,” ASME Power Conference, pp. V002T12A005- V002T12A005, 2017, Lake Buena Vista, FL.
  19. A. Papadimitratos , Sarvenaz Sobhansarbandi, V. Pozdin, A. Zakhidov, Fatemeh Hassanipour “Evacuated Tube Solar Collectors Integrated With Phase Change Materials and Silicone Oil,” ASME 2017 Power Conference, pp. V002T09A014-V002T09A014, 2017, Lake Buena Vista, FL.
  20. Fatemeh Hassanipour, “Biomechanics of the Lactating Breast,” Bluebonnet Symposium on Thermal-Fluid Sciences, April 2017, at Southern Methodist University in Dallas, TX.
  21. Diana Alatalo, Fatemeh Hassanipour, “Capturing The Oral Peripheral Pressure Of Infants While Breastfeeding,” Poster Presentation, SB3C2017 Summer Biomechanics, Bioengineering and Bio-transport Conference, Tucson, AZ, USA.
  22. Lin Jiang, Fatemeh Hassanipour “Infant Oral Cavity Pressure Data Processing,” Poster Presentation, SB3C2017 Summer Biomechanics, Bioengineering and Biotransport Conference, Tucson, AZ, USA.
  23. Mohammad Aliakbari, Fatemeh Hassanipour, “Bioheat Transfer In Lactating Human Breast,” Poster Presentation, SB3C2017 Summer Biomechanics, Bioengineering and Biotransport Conference, Tucson, AZ, USA.
  24. Diana Alatalo, Fatemeh Hassanipour, “An Experimental Study on Human Milk Viscosity,” Proceedings of the 2016 International Mechanical Engineering Congress & Exposition IMECE2016, November, 2016, Phoenix, AZ, USA. Best paper award by ASME-Fluid division.
  25. Xudong An, Fatemeh Hassanipour,“Numerical Simulation of Air Vortex Interaction with Porous Screen,” Proceedings of the 2016 International Mechanical Engineering Congress & Exposition IMECE2015, November, 2015, Houston, TX, USA.
  26. Fatemeh Hassanipour, V. Pozdin, A. Zakhidov, “Solar Water Heating System with Phase Change Materials and Carbon Nanotube,” ASHRAE Transactions, vol. 120, no. 1, pp 1, 2014.
  27. Negin Mortazavi, F. Hassiotou, Donna Geddes, Fatemeh Hassanipour, “Mathematical Analysis of Mammary Ducts in Lactating Human Breast,” The 36th Annual International Conference of the IEEE Engineering in Medicine and Biology, August 2014, Chicago, USA.
  28. Negin Mortazavi, Donna Geddes, Fatemeh Hassanipour, “Modeling of Milk Flow in Mammary Ducts in Lactating Human Female Breast,” The 36th Annual International Conference of the IEEE Engineering in Medicine and Biology, August 2014, Chicago, USA.
  29. Xudong An, H. Fultz, Fatemeh Hassanipour, “Experimental Study of Air Vortex Interaction with Porous Screens,” Proceedings of the 5th International Conference on Porous Media and its Applications in Science and Engineering ICPM5, June, 2014, Kona, Hawaii, USA
  30. Arun K. Karunanithi, Fatemeh Hassanipour, “Heat Sink with Stacked Multi-Layer Porous Media,” Proceedings of the 5th International Conference on Porous Media and its Applications in Science and Engineering ICPM5, June, 2014, Kona, Hawaii, USA
  31. Xudong An, H. Fultz, S. Iyengar, Fatemeh Hassanipour, “Experimental Investigation of Air Vortex Interaction with Porous Screens,” Proceedings of the ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting and 11th International Conference on Nanochannels, Microchannels, and Minichannels, FEDSM2014, ICNMM 2014, Chicago, Illinois, USA.
  32. Arun K. Karunanithi, Fatemeh Hassanipour, “Heat Sink with Stacked Multi-Layer Porous Media,” Proceedings of the ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting and 11th International Conference on Nanochannels, Microchannels, and Minichannels, FEDSM2014, ICNMM 2014, Chicago, Illinois, USA
  33. Negin Moratazavi, Fatemeh Hassanipour, “Computational Fluid Dynamic Modeling of Milk in Mammary Ducts in Lactating Human Female Breast,” 7th International Conference on Thermal Engineering: Theory and Applications, May 2014, Marrakesh-Morocco
  34. Fatemeh Hassanipour, Alexios Papadimitratos, Vladimir Pozdin, Anvar Zakhidov “Multifunctional Solar Selective Absorbers with Phase Change Materials and Carbon Nanotube,” 7th International Conference on Thermal Engineering: Theory and Applications, May 2014, Marrakesh-Morocco
  35. Fatemeh Hassanipour, Vladimir Pozdin, Anvar Zakhidov, “Solar Water Heating System with Phase Change Materials and Carbon Nanotube,” The ASHRAE 2014 Winter Conference, January 2013, New York, NY, USA.
  36. Kaveh Fathian , Fatemeh Hassanipour, and Nicholas R. Gans, “Virtual Thermal Sensing and Control of Heat Distribution using State Estimation,” ASME 2012 International Mechanical Engineering Congress and Exposition, November 2012, Houston, TX.
  37. Navid Omidvar and Fatemeh Hassanipour, “Experimental Analysis of Nanofluid Slurry through Rectangular Porous Channel,” ASME 2012 International Mechanical Engineering Congress and Exposition, November 2012, Houston, TX.
  38. Howard Fultz and Fatemeh Hassanipour, “Analysis of Vortex Flow Through Porous Media,” 4th International Conference on Porous Media and its Applications in Science, Engineering and Industry, June 2012, Potsdam, Germany.
  39. Fatemeh Hassanipour, “Thermo-Fluid Systems Inspired by Processes and Structures in the Mammalian Lung,” ASME 10th International Conference on Nanochannels, Microchannels and Minichannels ICNMM, 2012, Puerto Rico, USA. Invited Keynote Speaker
  40. Negin Mortazavi and Fatemeh Hassanipour, “Heat Transfer in Iso-Thermal Triangular Channel Filled with Porous Media,” The 10th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2012, Puerto Rico, USA.
  41. Navid Omidvar, Ryan Perkinson and Fatemeh Hassanipour, “Experimental Analysis of Phase Change Material Slurry through Rectangular Porous Channel,” ITherm Conference, May 2012, San Diego, CA.
  42. Negin Mortazavi and Fatemeh Hassanipour, “Effect of Inertia and Viscosity Force on Heat Transfer in Triangular Porous Channels,” ITherm Conference, May 2012, San Diego, CA.
  43. Negin Mortazavi and Fatemeh Hassanipour, “Analysis of Flow and Heat Transfer in Triangular Porous Duct with Isothermal Boundary Conditions,” ASME 2011 International Mechanical Engineering Congress and Exposition, November 2011, Denver, CO.
  44. Negin Mortazavi and Fatemeh Hassanipour, “Effect of Inertia and Viscosity Force on Heat Transfer in a Triangular Porous Channel with Isothermal Walls,” ASME 2011 International Mechanical Engineering Congress and Exposition, November 2011, Denver, CO.
  45. Shukla Manali and Fatemeh Hassanipour, “Heat Transfer Enhancement by Slurry of Phase Change Material Through Rectangular Porous Channel,” ASME 2011 International Conference on Nanaochannels, Microchannels, and Minichannels, ICNMM 2011, Edmonton, Canada.
  46. Laura Small and Fatemeh Hassanipour, “Phase Change Material Particulate Flow through a Rectangular Channel: Effect of Parachute-Shaped Particles on the Heat Transfer,” ASME 2011 International Conference on Nanaochannels, Microchannels, and Minichannels, ICNMM 2011, Edmonton, Canada.
  47. Fatemeh Hassanipour and Jose Lage, “Forced Convection Heat Transfer with Polystyrene and Encapsulated Paraffin Beads,” Fourth International Conference on Thermal Engineering Theory and Applications, January 2009, Abu Dhabi, U.A.E.
  48. Fatemeh Hassanipour and Jose Lage, “Modeling and Analysis of Convection Heat Transfer with Phase Change Material: Effect of Particle Size,” Fourth International Conference on Thermal Engineering Theory and Applications, January 2009, Abu Dhabi, U.A.E.
  49. Fatemeh Hassanipour and Jose Lage, “Simulation of Turbulent Flow in Porous Media,” Fourth International Conference on Thermal Engineering Theory and Applications, January 2009, Abu Dhabi, U.A.E.
  50. Fatemeh Hassanipour and Jose Lage, “Turbulent Flow in Porous Media,” 61st Annual Meeting of the APS Division of Fluid Dynamics, November 2008, San Antonio, TX.
  51. Fatemeh Hassanipour and Jose Lage, “Enhanced Mini-channel Forced Convection with Encapsulated Phase-Change Particles,” ASME Summer Heat Transfer Conference, August 2008, Jacksonville, FL.
  52. Fatemeh Hassanipour and Jose Lage, “Bio-inspired Particle Enhanced Capillary Heat Exchanger,” Proceedings of the Sixth International ASME Conference on Nano-channels, Micro-channels, and Mini-channel, ICNMM 2008, Darmstadt, Germany.